top of page

CLRB: Repeat Cycle Plug-In Timer


• Independent On & Off



• Digital CMOS Design


• 10 Amp, DPDT


• ±0.2% Repeatability


• Transient Protected


• On Time Ranges Up to 

  24 Hours


• Off Time Ranges Up to

  24 Hours


Repeat Cycle

When input voltage is applied to the CLRB, the first delay period (off time) begins. At the end of the off time period, the internal relay is energized and the second delay period (on time) begins. At the end of the on time, the internal relay is de-energized. The CLRB will continue to cycle the internal relay until the input voltage is removed. Separate knobs are used to adjust the off and on times. (The CLRB is also available with reverse operation.)




Input Voltage:

     24 or 115VAC ±10%, 50/60Hz.

     24 or 125VDC ±10%, Filtered to Full Wave.

Time Delays:

     Type: Adjustable or Factory Fixed

     Range: 50 Milliseconds to 24 Hours

     Repeat Accuracy: ±0.2% of Time Range or

          ±10Milliseconds, whichever is Greater.

     Fixed Time Accuracy: ±5% Worst Case

     Reset Times: 50 Milliseconds,

Typical Protection: Varistor and/or R-C Network

Power Consumption: 5VA

Output Relay:

     10 Amps @ 120/240VAC

     500,000 Full Load Electrical Cycles

     50,000,000 Mechanical Cycles

U.L. Ratings:

     6.5 Amps, 1/3 HP, 125VA @ 240VAC

     7 Amps, 1/6 HP, 125VA @ 120VAC




Mounting: Plug-In

Termination: 8 or 11 Pin & Blade Base

Packaging: Dust Cover

Weight: 7 Oz.


Ambient Temperatures

Operating: -10°C to 65°C

U.L. Operating: -10°C to 40°C

Storage: -10°C to 85°C


bottom of page