TDR-F: Off Delay & One Shot Timer
• 24 to 240VAC/VDC
• Off Delay & One Shot
• Time ranges up to
• Adjustment Knobs
• Plug-In Package
• DPDT Contacts
• Status LEDs
The TDR-F alows you to select between Off Delay and one Shot timing. The universal supply voltage accepts most typical control voltages
By selecting Off Delay with the function pot on the top, with supply voltage applied, when the Initiate Voltage or Contact are activated, the internal relay is energized. When the Initiate Voltage or Contact are de-activated, the internal relay remains energized and the timing begins. After the time delay, the internal relay de-energizes and the timing resets.
If the Initiate Voltage or Contact re-activate before the timing cycle is completed, the timing is reset. The timing will re-start when the Initiate Voltage or Contact is de-activated again.
By selecting One Shot with the function pot on the top, with supply voltage applied, when the Initiate Voltage or Contact is activated, the internal relay is energizes and the timing begins. After the time delay is completed, the internal relay de-energizes and the timing is reset.
Re-activating the Initiate Voltage or Contact during timing does not interrupt the timing cycle.
Supply Voltage: 24 to 240VAC/VDC
Frequency: 50 to 400Hz
Functions: On Delay & Interval On
Time Ranges: 0.1Sec. up to 24 Hrs.
Fine Adjustment Pot:
On Top: Adjusts within Range
Remote (11Pin): 1KΩ to 20KΩ Adjusts within Range
Power Consumption: 1.5VA
Indicators: 2 LEDs
Output Rating @ 25°C:
5 Amps @ 250VAC (General Purpose)
1/8 HP @ 120VAC
5 Amps @ 30VDC
B300 (Pilot Duty)
3 Amps @ 120VAC
1.5 Amps @ 240VAC
Termination: 8 or 11Pin
Packaging: Dust Cover
Weight: 8.5 Oz. Approx.
Operating: 0°C to 65°C
Storage: -40°C to 85°C
Must be used with UL approved socket to satisfy UL Listing.