CSR: Go-No Go AC Current Sensing Relay
• Self Powered
• 4 to 200 Amps AC
• 10 Amp Contact
• Screw Terminals or
Stranded Wire Leads
• Large Wire Thru Hole
• DIN Rail Mountable
• Compact Design
• Low Cost
Operation
AC Current Sensing
The CSR generates its own operating power supply from the monitored current line. No external power supply is needed. A current greater than the pick-up current is required to energize the output relay. The output relay will stay energized until the current in the line being monitored drops below the drop-out current level for the CSR.
Specifications
Electrical
Input Supply Voltage: None Required
Pick-Up Range: 5.0 Amps ±12%
Power Up Delay: 0.1Sec. Fixed
Drop-Out Range: 4.5 Amps ±7%
Drop-Out Delay: None
Frequency: 50/60Hz
Maximum Current:
200 Amps LRA, 15 Seconds max.
64 Amps FLA, Continuous
Reset: Automatic
Output Rating @ 25°C:
10 Amps @ 250VAC, 30VDC (UL)
300W (D.C.), 2500VA (A.C.) Max. switching power (resistive)
6,000 Full Load Electrical Cycles (UL)
100,000 Full Load Electrical Cycles
20,000,000 Mechanical Cycles Physical
Physical
Maximum Load Wire Diameter: 0.560” Dia.
Mounting: Surface or DIN Rail
Termination: #16 Stranded Wire Leads
Packaging: Dust Cover Weight: 18 Oz.
Ambient Temperatures
Operating: 0°C to 55°C
Storage: -10°C to 85°C