top of page

CFB: Off Delay Plug-In Timer


• Digital CMOS Design


• 10 Amp, DPDT


• ±0.2% Repeatability


• Transient Protected


• Timing Ranges Up to

  24 Hours


• Control Voltage on

  Customer Contact


Off Delay

When input voltage is available, closure of the customer supplied contact (C1) or application of the control voltage will energize the internal relay. When the contact is opened or control voltage removed, the timing cycle begins. At the end of the timed period, the relay will be de-energized. Re-closure of the contact or control voltage during the timing cycle will reset the timer. The CFB resets when the control contact (C1) is re-closed or the control voltage is re-applied. For “True Off Delay” (No Power) see the COB.




Input Voltage:

     24 to 120VAC, ±10%, 50/60Hz.

     24 to 125VDC ±10%, Filtered or Full Wave

Time Delays:

     Type: Adjustable or Factory Fixed

     Range: 50 Milliseconds to 24 Hours

     Repeat Accuracy: ±0.2% of Time Range or

          ±10Milliseconds, Whichever is Greater

     Fixed Time Accuracy: ±5% Worst Case

Reset Times:

     During Timing: 50 Milliseconds, Typical

     After Timing: 50 Milliseconds, Typical

Protection: Varistor and/or R-C Network

Power Consumption: 5VA

Output Relay:

     10 Amps @ 120/240VAC

     500,000 Full Load Electrical Cycles

     50,000,000 Mechanical Cycles

U.L. Ratings:

     6.5 Amps, 1/3 HP, 125VA @ 240VAC

     7 Amps, 1/6 HP, 125VA @ 120VAC



Mounting: Plug-In

Termination: 8 or 11 Pin & Blade Base

Packaging: Dust Cover

Weight: 7 Oz.


Ambient Temperatures

Operating: -10°C to 65°C

U.L. Operating: -10°C to 40°C

Storage: -10°C to 85°C


bottom of page